come da titolo, che ne pensate di questo sub? lo prenderei usato a 50 euro, e andrebbe a sostituire il mio impact 3712, senza cambiare cassa, anche perchè ho il doppio fondo fatto ad hoc.
Specifications FURY12
DC Resistance (Revc) 3 Ohms
Resonance frequency (Fs) 28.9 Hz
Flux Length (BL) 14.1 Tesla/m
Acoustical Compliance (Vas) 80 litres
Mechanical Q-factor (Qms) 4.92
Electrical Q-factor (Qes) 0.41
Total Q-factor (Qts) 0.38
Mechanical suspension loss resistance (Rms) 5.5 kg/s
Electrical suspension loss resistance (Res) 66 Ohms
Compliance (Cms) 0.21 mm/N
Total Mass Load (Mms) 148.1 gr
Nref 0.43%
Acoustical Compliance (Vas) 74.9 liters
Rp 33 Ohms
Lp 41.1 mH
Cp 1036.2 uF
Voice coil inductance (Le) 1.7 mH
SPL 88,8dB
Continuous power handling 350 Watts
Maximum power handling 700 Watts
Sensitivity 89dB/w/m
Mounting depth 160mm
Cut out diameter 320mm
Specifications FURY12
DC Resistance (Revc) 3 Ohms
Resonance frequency (Fs) 28.9 Hz
Flux Length (BL) 14.1 Tesla/m
Acoustical Compliance (Vas) 80 litres
Mechanical Q-factor (Qms) 4.92
Electrical Q-factor (Qes) 0.41
Total Q-factor (Qts) 0.38
Mechanical suspension loss resistance (Rms) 5.5 kg/s
Electrical suspension loss resistance (Res) 66 Ohms
Compliance (Cms) 0.21 mm/N
Total Mass Load (Mms) 148.1 gr
Nref 0.43%
Acoustical Compliance (Vas) 74.9 liters
Rp 33 Ohms
Lp 41.1 mH
Cp 1036.2 uF
Voice coil inductance (Le) 1.7 mH
SPL 88,8dB
Continuous power handling 350 Watts
Maximum power handling 700 Watts
Sensitivity 89dB/w/m
Mounting depth 160mm
Cut out diameter 320mm